-
signal sampling from waveform CSV -DPO7354C with python
Hi everyone,
i have a waveform CSV from textronix DPO 7354C osilloscope,
the signal is very long, about 3 seconds, and i whould like to get the RMS every 1ms over the whole signal,
but im having trouble understanding the data on the CSV and converting is to RMS measurements.
i would appreciateany insite that can help me understand this waveform CSV sinsce i cant fine any information on the web.
here is an example of part of the data (the file is to large to upload):
Record Length 2500000 Points -8.00E-01 1.80E+00 Sample Interval 1.00E-07 s -8.00E-01 6.00E-01 Trigger Point 8000000 Samples -8.00E-01 1.80E+00 Trigger Time 1.68E-08 s -8.00E-01 6.00E-01 -8.00E-01 6.00E-01 Horizontal Offset -8.00E-01 s -8.00E-01 1.80E+00 -8.00E-01 1.80E+00 -8.00E-01 1.80E+00 -8.00E-01 6.00E-01 -8.00E-01 1.80E+00 -8.00E-01 6.00E-01 -8.00E-01 -6.00E-01 -8.00E-01 1.80E+00 -8.00E-01 6.00E-01 -8.00E-01 6.00E-01 -8.00E-01 6.00E-01 -8.00E-01 -6.00E-01 -8.00E-01 1.80E+00 -8.00E-01 6.00E-01 -8.00E-01 6.00E-01 -8.00E-01 1.80E+00 -8.00E-01 1.80E+00
You’re offline. This is a read only version of the page.
