Priyanka B M

Hello, I am finding a time delay in the current measurement carried out by DAQ 6510, when voltage is sourced by 2220g-30-1 power supply. Both the instruments are configured using LABVIEW software. We included a time delay of 5 ms for DAQ 6510 to measure the current, which shows some non-linear curve for resistor. With the increase in the time delay to 500 ms we got proper linear curve for resistor. We would like to have proper measurements from the DMM, with very less-time delay of about 5 ms between each measurement. I have attached a file to show variation in the graph with respect to time delay for 1k ohm resistor, please check. Our application requires quick measurements for various devices with proper synchronization. So, how can we increase the sourcing speed of 2220g-30-1 power supply? Or can i get any suggestion to resolve this problem. Thanks, in advance.