-
How to do recurring measurement using 4200A-SCS
We recently bought a 4200A-SCS. I used it for transfer curve measurement(sweep Vg, measure Ids). I would like to use the same parameters for 10 consecutive measurments, what could I do? Currently, I need to click "Run" 10 times. I used Clarius for measurement. -
Python for 4200-SCS
I am using 4200-SCS, the KITE interface is pretty old. Could python be used to run 4200-SCS? What script should I use to connect the tool with python.
-
What is the averaging time for my measurement with Kiethley 4200SCS
I am using Kiethley 4200SCS for transfer curve measurement with the sweeping mode.
As for ITM Timing, here are the index:
Speed: Normal; Delay Factor 1; FIlter Factor 1; A/D Aperture Time: Auto PLCs
Both the Sweep Delay and the Hold Time is 0
I am wondering what is the MT(measure time) for my measurement:
For my case, I sweep V from 0-0.3 V with 1mV step
From this file (P17, Sweep Mode Timing Diagram): https://nanohub.org/resources/10435/download/2010.11.10-L04-Keithley.pdf;
I am wondering what's the default delay for my case, how long is the measure time and what happens within the measurement time (How long is the averaging time to generate a data point)
-
RE: How to automate sweeping every 10 min
<p>Is it possible to schedule a zoom meeting? Got confused by all the buttons</p> -
RE: How to automate sweeping every 10 min
<p>Thank you, Andrea. How could I enable Cycle mode?</p> <p></p> -
RE: How to automate sweeping every 10 min
this is the interface I am working on -
How to automate sweeping every 10 min
I am using KITE with 4200 SCS to do 3 channel measurement. I need to run (Vgate sweeping and take down Ids) * 2 every 10 min. Currently, I need to click the run button and append button every 10 min. Is there a way to automate this process such as add a 10 min waiting time between every 5 measurements? Thanks!