Vikas More

Hi Afonso,

Thanks for your reply,
Overshoot measurement 25% means signal must cross atleast 30V (6V more for 24V). From the waveform max. value is not crossing 26V. It is newly purchase instruments MDO3014. 
Also I have noticed another issue that falls triggering in single shoot mode. Please find attached another waveform of measurement of delay between falling of channel 4 at 1V from 5V and Channel 1. Channel 4 is at 5V only still scope trigger the waveform and giving false result.

 

Please describe the logic of measurement taken for overshoot in MDO3014 model. Since waveform not crossing 10% limit still DSO measures overshoot 25.4%. Please help to understand this calculation and factors affecting.
See the attached waveform for 24V rising signal.