Keithley DMM6500 operation event register

Hi! I have a Keithley DMM6500, and I am attempting to program the operation event register. This requires knowledge of the event numbers that correspond to events. However, there isn't a list of event numbers in the reference manual, just a few examples, and a few others that I've found by examining the event log on the DMM6500 itself.
e.g.
Trigger model initiated = event number 2731
Trigger model aborted = event number 2728
Trigger model idled = event number 2732
A default buffer is 100% filled = event number 4918 
A default buffer is 0% filled ​​​​​​​= event number 4917

Please could you provide a list of event numbers for the Keithley DMM6500 so that SCPI commands such as STATus:OPERation:MAP can be fully utilised? Thanks

Hi Siobhan Tobin, 

In our documentation we included the most common commands. We are working on getting some additional information to address your concerns but the list of commands is quite extensive. We will circle back this coming week with additional info.

Paul Holland, Technical Writer

Thanks Paul. To be clear, I am after the event numbers used as input for status model SCPI/TSP commands such as "STATus:OPERation:MAP <bitnumber>, <eventnumber> <eventnumber>". The list of SCPI commands in the reference manual is already pretty exhaustive.
I imagine if there is a service manual for the DMM6500 that would probably have such a list of event numbers. Cheers

Hi Siobhan,

We working on putting together a list of event numbers and will post it on github when it is ready. We'll let you know in this forum when it gets posted.

Thank you for contacting us!


 

Hi Siobhan Tobin, 

Thanks for reaching out regarding these event numbers. We are going to reach out to you directly with this information.

Paul Holland, Technical Writer