-
RE: TCP 202A probe connection to MSO2024B using a TPA-BNC adapter
Hello,
Appreciate this reply was some ago, but could you please elaborate on your comment about manually configuring the channel,
"If you switch to connecting the TCP202A to a 1103, then have a 50Ω termination between the 1103 and the scope it will resolve the issue. Note, you will need to manually configure the channel to support this setup".
I recently purchased a P6248 differential probe and 1103 TEKPROBE® II power supply to use with a scope that only supports 1MΩ input impedance (I've order the 50 Ω BNC Coaxial Terminator 011-0049-01) so would appreciate the advice.
Vous êtes hors connexion. Ceci est une version en lecture seule de la page.
