Jeffrey Streeter

I'd say that the tips are defective since no matter how firm I press them, they do not click or stay in place like the other hook tips do. Unfortunately, I cannot be without my probes, so I cannot send them and the tips to verify what I already know (which is why I started this thread). I won't take the risk of purchasing another set, so I'll have to look for another solution. Thank you for your time.

They do not click in to place like the other standard tip attachments do and as soon as you try to clip them onto something (i.e. a pin), the tip comes off. They are unusable to me, so I thought maybe there's a technique to using them...

...and this picture is without:

Hi Afonso,
This picture is with the tip attached:

Brand new setup (i.e. brand new scope) the supplied micro hook tips (p/n 013-0363-xx) barely attaches to the probes, they do not "click" onto the probes. So, they do not remain attached to the probe for circuit analysis. Is there a trick to getting this to work or are the tips defective? Is this a known problem? None of the four tips work on any of the four probes.