-
Precise measurement <1ms with the data logger (Keithley 2701)
Hello, I am using the Keithley measuring system 2701 with the modules 7700 and 7703 for the first time.
The connection to the KickStart software was successfully established and the first measurements were carried out with the data logger. Through the settings (Time between Scans = 0.0001s, NPLC = 0.0002) I achieve a scanning time of approx. 4ms.
Ideally, the measurement should be much more precise and be in the range of 1ms. Hence the question: Are there settings that allow an even higher sampling rate? Or is that not possible at all with this structure?
You’re offline. This is a read only version of the page.
