-
2636B: V pulse and transient current measurement
Hi,
I'm new on programming an SMU to perform measurements and I would like your input.
I'm using a 2636B, and I would like to perform the following measurements:
a) apply and keep a voltage and measure the current response as a function of time,
b) apply a voltage pulse, and measure the current response as a function of time while applying and after the pulse ends, in order to see the transient current behacior of my DUT.
The first task is quite straightforward. What I mainly struggle with is the second task with the simultaneous current measurement as a function of time while the voltage change levels. What would you suggest?
I am using LabView to program my device.
Thank you in advance.
You’re offline. This is a read only version of the page.
