Micael Moreau

Hi,

I really hope someone can help me with that.

I want to test continuity in 4 wires (which is easily done)
All 4 channels resistance tests will return  < 1 ohm. if all ok.

And then detect possible shortcut fails between those 4 wires : (attached picture 1)

Like for example, checking between 13-H to 14-H, 13-H to 15-H, etc.
In fact, if im not wrong, to check any possible shortcuts, i need to make sure i get infinite ohms between all combinations.

Is it possible with this card ?? : (attached picture 2)


Thank you so much.