Software to control scope

PLEASE BE ADVISED: The content of this posting may contain high-voltage safety risk that could potentially result in fatality. The answers provided by Tektronix experts are specific to the question posed in the Thread, and should not be applied to all situations, regardless of similar issues, products, or conditions. Please refer to the safety section of your product manual.
User, Forum

0

Posted 3 years ago by User, Forum

I'm looking for the software(s) that will let me connect to the scope using my laptop over USB and control the scope.

Answer
Expert, Tektronix Applications

0

Posted 3 years ago by Expert, Tektronix Applications

The most straight forward UI for remote operation would probably be e*Scope which can be accessed by navigating to the scope's IP address in a web browser but this would require a LAN connection rather than USB. For direct control over USB you can use the command set from the programmers manual (https://www.tek.com/en/manual/oscilloscope/3-series-mixed-domain-oscilloscope-3-series-mdo) as well as the free tool made by one of our engineers, TekScope Utility: https://forum.tek.com/viewtopic.php?f=571&t=140451

You must be signed in to post in this forum.