Brian Schousek

After a lot of searching, I've discovered a technique that works, but is awfully clunky. 

with a thumb drive in the scope:
SAVE:EVENT:BUS1 "e:\\decode.csv"
-wait for a bit for the file to be generated
FILESystem:READfile "e:\\decode.csv"
-read the raw data back and decode
FILESystem:DELEte "e:\\decode.csv"
- to get ready for the next one
 

Upon more investigation, one technique is to save the event table to media. I can successfully save the event table via the front panel, but when I try with:
SAVe:EVENTtable:BUS <QString> I get nothing but a timeout.
I've tried different iterations such as SAV:EVENT:BUS1, SAVE.EVENT:B1, SAV:EVENT:BUS1 "asdf.csv" but they all end in a timetout

I am taking some analog measurements in conjunction with asynchronous serial data using a 3 series MDO. How can I programmatically retrieve the bus decode results table? I'm able to use MEASU:MEASX:VAL? command for the analog measurements, but am unable to find in the documentation an equivalent means to fetch the hex bytes.