Cyril Béguet

Hi,
I would like to know if it's possible to simply export the measurement values I set on my MDO34? I set a couple of delay measurements and at each triggering the measures are shown and statistics calculated. But I want to make more analysis on the measure, like histogram display...
How can I export the measures to a cvs file (for example)? Can I do it from the oscilloscope it self or should I use a special tool on my computer to acquire the data in live?

Thanks for your help.

Cyril

Hi Afonso,

I tryed but the remote control and transfer is not working. I got an error 1605 : Unable to write to the instrument when I try to transfer a waveform with the Transfer & control window.
And when I use a normal file transfer, only the csv file is visible from the oscilloscope.
The Scope Acquisition Wizard is also noto working (the device is not detected, even if Tek VISA is seeing it).
 

in the MDO 3 series manual, it's writen that AFG can be used to manipulate the waveforms. But in the software version 3.6 the MDO3x are not listed in instrument selection.
What device model should I select to have the right file format and be able to send it to my MDO34 through the application?

Thanks