Minseo Kim

Minseo Kim

已加入: 2023/8/30

  • RE: How can I set "pulse mode" in keithley 2602B ?

    Wed, 20 Dec 2023 01:07:51 GMT – How can I set "pulse mode" in keithley 2602B ?
    Hello.
    2nd script about EOA region is what I needed.
    Thank you for your help.!

  • How can I set "pulse mode" in keithley 2602B ?

    Fri, 15 Dec 2023 08:55:10 GMT – How can I set "pulse mode" in keithley 2602B ?
    Hello.

    I would like to measure pulse in the 1.5A @20V region on Keithley 2602B. The pulse width is 1ms and the pulse duty is 10%, so it looks OK in the pulse specification. However, when performing a pulse measurement, the error "-5007: Operation would exceed safe operating area of the instrument" appears. To create a pulse, I used a trigger timer and set it to "smua.trigger.endpulse.action = 0" (smua.trigger.endpulse.action = smua.SOURCE_IDLE).

    Is there any other way to set up "Pulse" mode?

    Attachment file is captured image of "1KW-60906-0_Series_2600BDatasheet_112718.pdf" file's 2602B pulse specification.
    Thank you.