Siobhan Tobin

Thanks Paul. To be clear, I am after the event numbers used as input for status model SCPI/TSP commands such as "STATus:OPERation:MAP <bitnumber>, <eventnumber> <eventnumber>". The list of SCPI commands in the reference manual is already pretty exhaustive.
I imagine if there is a service manual for the DMM6500 that would probably have such a list of event numbers. Cheers

Hi! I have a Keithley DMM6500, and I am attempting to program the operation event register. This requires knowledge of the event numbers that correspond to events. However, there isn't a list of event numbers in the reference manual, just a few examples, and a few others that I've found by examining the event log on the DMM6500 itself.
e.g.
Trigger model initiated = event number 2731
Trigger model aborted = event number 2728
Trigger model idled = event number 2732
A default buffer is 100% filled = event number 4918 
A default buffer is 0% filled ​​​​​​​= event number 4917

Please could you provide a list of event numbers for the Keithley DMM6500 so that SCPI commands such as STATus:OPERation:MAP can be fully utilised? Thanks