-
P6139B accessories
Need the Probe tips for probing signals
Model: P6139B probe tips
Qty: 10 pcs -
MDO4104C upgrade options
I have a MDO4104C with the "4MSO" option, can you tell me what this option is and is there a newer option without a spectrum analyzer built-in?
-
TBS1154 Optics
I need manual, user guide, data sheet, GUI and software and drivers associated with this instrument.
-
TAP1500 operating temperature conditions
I would like to know if there are any adverse affects of operating the probe tip at -10C or even -20C. The specs have a lower limit of 0C operational. Does going below the lower limit damage the product or reduce the measurement accuracy?
-
TDS220 OPENCHOICE SOFTWARE
I have a question about using OpenChoice and TekVISA with my TDS220. I'm aware that the device is no longer supported, but have switched to TekVISA v 4.0.4.2, which appears to work with the 220. I just want to know what version of OpenChoice I would need alongside this version of TekVISA and where to get it. If this information isn't available, what other software could I use to transfer a copy of my screen as a bitmap, to then use with Excel?
-
MDO34 not starting
My MDO34 started yesterday and now it will not start. It shows the Start up screen and doesn't move from there.
-
TBS2202B not allowing 2 GS/s on unit
How do I get my device to up to 2 GS/s on my TBS2202B? I read in the unit's specifications that it can perform up to 2 GS/s, but when I plug waveforms into the device, it only appears to perform up to 1 GS/s.
-
80E04 Non-volatile memory
Does the 80E04 had non-volatile memory?
-
2182A Noise
Hi, we are trying to measure voltage ~1nV. What's range of noise in 2182A, is it on the same order of 1nV? If so, do you have any recommendation (for example calibrating) to make it measure more accurately? Thanks.
-
Waveform on DPO70804 remote access
When I remote access the scope, I can set up all the parameters. However, the waveform is missing on my desktop, which I use for remote access. I attached the screenshot, and it should be a pulse(setup by myself) that I could find locally. From the pk-pk measurement, the waveform is still on the scope. But it could not see from the remote desktop. Compared the local scope screen and remote desktop a few times; I am sure the waveform is showing correctly and is measuring accurately on the local scope screen.