Tektronix Applications Expert

The conversion kit to upgrade a RSA7100A to Windows 10 is supply deplete. One option is to upgrade the RSA7100A to a B model. The B version runs Windows 10.

It is possible to upgrade your scope to Windows 10, the part to do so is DPO7SSD-W10. The exact option will depend on whether your scope is using the motherboard supporting the IntelCore 2 (M566) or the IntelCore i7 (M581) CPU, you can verify this by checking the system information within Windows on the scope or referring to the attached image to identify the I/O shield of the motherboard. When you are ready you can order the part directly from buy@tektronix.com 

The software option for USB 3 automated compliance testing is USBSSP-TX which requires options DJA and USB-TX. You can view more details in the datasheet here: https://www.tek.com/en/datasheet/usb32-type-c-transmitter-and-receiver-solutions

Thanks for contacting us,

This upgrade does exist, listed as part number MSO70KC-UP and the USB3 option can be added with part number DPO-UP USB3. Please contact buy@tektronix.com for pricing.

Unfortunately, there is no way to dual boot with Linux/Windows off the same drive. The only option is to have both drives and physically swap them out. Let me know if you have any additional questions.

Thank you.

You can upgrade your DPO73304DX to windows 10 by ordering part DPO7SSD-W10. The drive is user installable but there are two different but the exact option will depend on whether your scope is using the motherboard supporting the IntelCore 2 (M566) or the IntelCore i7 (M581) CPU, you can verify this by checking the system information within Windows on the scope or referring to the attached image to identify the I/O shield of the motherboard. When you are ready you can order the part directly from buy@tektronix.com

Thanks for contacting us,

It is possible to upgrade your scope to Windows 10, the part to do so is DPO7SSD-W10. The exact option will depend on whether your scope is using the motherboard supporting the IntelCore 2 (M566) or the IntelCore i7 (M581) CPU, you can verify this by checking the system information within Windows on the scope or referring to the attached image to identify the I/O shield of the motherboard. When you are ready you can order the part directly from buy@tektronix.com

Hello,

The latest firmware would depend on if you are using the optional Windows drive.

Windows version of the scope:
https://www.tek.com/en/support/software/firmware/5-series-mso-windows-firmware-v1402

Non-Windows Version:
https://www.tek.com/en/support/software/firmware/5-series-mso-nonwindows-firmware-v1381

Hello,

USB 3.2 is backwards compatible, so that is unlikely the issue. Check that the file system is formatted to FAT32. To do this, plug the USB into your computer, right click on the drive and select Properties.

Hello,

Yes, V26.05 is the latest firmware version for the TBS1104.

Hello,

It's likely that you have your 2400 set to RS-232 remote interface and not GPIB. Once you set the remote interface to GPIB, KickStart should be able to detect the 2400. See page 36 of this manual: https://download.tek.com/manual/2400S-900-01_K-Sep2011_User.pdf