TCP 202A probe connection to MSO2024B using a TPA-BNC adapter

I'm using a benchtop variable DC power supply operating in constant current short circuit mode, and a DMM measuring the current. Is it technically feasible to use a TCP 202A current probe connected to a MSO2024B using a TPA-BNC adapter, with 12V DC @1.5 ADC?

No, the TCP202A needs to use the 1103 probe power supply and a 50Ω terminator instead of the TPA-BNC adapter. This is due to the TCP202A being designed for a 50Ω termination instead of the MSO2kB 1MΩ termination.

If you switch to connecting the TCP202A to a 1103, then have a 50Ω termination between the 1103 and the scope it will resolve the issue. Note, you will need to manually configure the channel to support this setup

I'm using TCP202A with 1103 and 50Ohm termination on TBS1104.  What is gain setting in A/V should I use?

Thanks Rajiv