Wissem Zayoud

thank you for your support.
I have some question

• The cmdScan and the cmdSimple are two buttons?
• do you have any liste of the function to configure the Keithley, I mean like the one you use it to configure the Keithley to read the a DC volt and to declare the NPLC;
  • _driver.Measurement.Function = Ke37XXMeasurementFunctionEnum.Ke37XXMeasurementFunctionDCVolts
  • '_driver.Measurement.Nplc = 0.1
  • driver.Scan.AppendScanList("1002", "myTempCfg")

I'm trying to develop Visual Basic code to connect my PC to a Keithley 3706A multimeter via an Ethernet, I have found this driver "3700/3700A Series IVI-COM/IVI-C Driver version 2.2.0 | Tektronix",and in the driver I have found a Visual Basic application as an example and use it to connect to the keithley.
Unfortunately, this code only works with the GPIB communication, and I can't find any other function in this driver that is used to connect to the Keithley via Ethernet.
I have attach to this the example screenshots (code & design) and the function used from the driver.
Can you please support me with the best driver or another function to connect to the Keithley via Ethernet as soon as possible? 

I'm trying to develop Visual Basic code to connect my PC to a Keithley 3706A multimeter via an ethernet cable, but I couldn't find this driver.
Can you please support me with this driver as soon as possible.