Forum User

When I copied screen shots from the scope to an attached usb drive, the time stamps of the files were not copied. Instead, the files copied to the usb drive get the time at the moment when each was copied. Is there a setting one can change so the original files' time stamps get copied?
FYI, the scope has the default embedded operating system.

I'm having issues when converting files from my RSA503A. After converting files using Adobe/GIMP, I've noticed a significant reduction in clarity/resolution when viewing it on RSA Map, and I'm wondering if this is normal. If not, what could be causing this issue

I would like to remotely control the output voltage/current of my Model 2230.
I've seen that KickStart is a simiple to use software, where can I download it?

Is the normal operation of the control loop response measurement to click the reset button each time?

Hi,
I'm looking at purchasing the P6021A and wanted to confirm what the connector was. Does this probe connect only to Tek scopes or to generic BNC connectors? Thank you!

I was connecting my Tektronix MSO44 to a PC through a USB cable. My PC could detect the device. However when I run it through Labview using visa and the drivers that is provided online, it couldn't communicate properly. I have checked it using NI-max and there is a yellow exclamation beside the connection whereas the other connections which are fine don't have such an issue. The above connection was achieved by an USB-B to USB-A connected to the USB Device port. The USB-A to USB-A to the USB host port don't work.

What types of oscilloscopes can the P5205 High Voltage Differential Probe connect to?

I need to connect to tbs2000b to pc to save screen shots and wave forms I have tried via ip address but it ask for password?

s it possible to buy some sort of adapter for the back of the tdc210 to be able to connect it to a computer for interfacing with matlab or labview?

Are the TBS2072 and P5210 compatible with each other? Also how many voltages the probe is capable of handling?