-
RE: Difference between 2230-30-1 and 2230G-30-1?
To learn about the difference between 2230-30-1 and 2230G-30-1, see the following link:
https://www.tek.com/en/products/keithley/dc-power-supplies/2220-2230-2231-series
-
RE: Is P6015A compatible with TBS2074B?
The P6015A will connect directly to the TBS2074B. It will require manual set up on the scope for the channel that connects to it. You will want to change the attenuation to 1000x.
-
RE: Diffferences between MSO58 and MSO58B?
Here is a fact sheet showing what is new with the MSO5B from the MSO5: https://www.tek.com/en/documents/fact-sheet/5-series-b-mso-vs-5-series-mso-comparison
-
RE: P2220: Replacement for P2200 probe
The P2220 is a compatible replacement for the P2200. See the links below.
https://www.tek.com/en/datasheet/passive-voltage-probe-1x-10x where you can find the datasheet as well as configure and obtain a quote.
https://www.tek.com/en/support/faqs/does-p2220-probe-replace-p2200-probe
-
RE: Calibration for TCP312A Probe
We recommend a 12 month calibration interval on most all of our instruments. This includes the TCP312A current probe. We do offer a service manual which covers performance verification and functional check that you can choose to utilize.
If you like you can contact service for a calibration quote.Below you can find the contact information for our Service Department and someone will be happy to help:
Tektronix/Keithley Repair/Calibration:
Web: https://www.tek.com/en/service-quote
Email: rmarequest@tektronix.com -
RE: ECCN for DMM6500
This information can be found on tek.com. Support - Export Codes
https://www.tek.com/en/support/export-codesDMM6500
ECCN = 3A992HTS = 9030320000
-
RE: What probes come with the TDS2104B?
You will receive one TPP0100 per channel.
-
RE: Accuracy of TDS3054B
We specify DC Gain Accuracy as of the reading. For example if you are looking at a 50mV reading you can expect it to be within ±1mV.
-
RE: Statement of volatility for DPO4014B
This information will be in our Declassification manual on tek.com.
link below.
https://www.tek.com/en/oscilloscope/mso4000-dpo4000-manual/mso4000b-and-dpo4000b-series-and-application-modules
Attached also. -
RE: Option 4-AFG on MSO54
The 4-AFG option enables the on-scope Arbitrary Function Generator. There is more information about the AFG in the primary user manual, starting on page 414: https://www.tek.com/en/manual/oscilloscope/456-series-mso-5-series-mso.