McKinney Ty

The model 2604B/2614B/2634B are lower cost in the 26xx Keithley family and are without some features to their other relatives. Unfortunately, we don’t have any physical port externally to make a trigger. Software can be used with the edition of another instrument to send a trigger. I would take a look at KickStart if you are using other Keithley/Tektronix instruments for that trigger. Otherwise, you would need to make this custom.

Unfortunately, you cannot change the default path to save projects every time. This requires a manual selection as you have been doing.
However, there is a sort of work around. First, create a folder in the desired path (such as on the desktop, in a certain folder, etc.) and save that Kickstart project there.
Then close KickStart, go to the path and open your project directly from the folder you saved it in. This should open KickStart automatically with your project loaded on screen. Run a test or gather data, save, and export. Check the export and it should be in this folder along the path you desired.

How do I save the path I'd like records to be saved in? We currently have to always go in and change it.

To find information such as the pinout for the analog backplane connector on the Keithley Model 3706A System Switching/Multimeter, see page 3-29 in the 3706A reference manual found at the attached link below, and see attached picture to this post.
Series 3700A System Switch/Multimeter Reference Manual | Tektronix
 

Looking for documentation on the analog backplane connector for the 3706A mainframe?