Forum User

Forum User

Joined: 9/24/2022

  • TBS1000 Digital Oscilloscopes Replacement?

    Thu, 29 Sep 2022 23:06:19 GMT – TBS1000 Digital Oscilloscopes Replacement?

    Good Afternoon,

    Could you please help us with this conundrum. We still looking for oscilloscopes to replace our aging TDS 1002Bs. We do not required high bandwidth (30Mhz or less will do), black and white display will be fine. The most critical feature we are looking for is the XY Mode that does not shrinks the display to a perfect square. We are not looking at a Lissajous Curve pattern. We are looking for a linear horizontal displacement cause by air pressure and where does it cross the Y-axis. That’s why we need the most resolution possible. We are shooting for a cost of $400 to $600 each.

  • MDO32 3-BW-100 SUP3-AFG upgrade question

    Thu, 29 Sep 2022 23:06:17 GMT – MDO32 3-BW-100 SUP3-AFG upgrade question

    Does the MDO32 3-BW-100 have to have the the SUP3-AFG installed from the factory, when purchasing, or is this a user installable option?

  • MDO4104C AFG Function Upgrade

    Thu, 29 Sep 2022 23:06:16 GMT – MDO4104C AFG Function Upgrade

    Are the AFG functions on m MDO4104C paid upgrades for the unit, and if so, what information can you share upgrades?

  • DPO7000 default Admin Password?

    Thu, 29 Sep 2022 23:06:14 GMT – DPO7000 default Admin Password?

    My DPO7000 powers up, but I cannot login. Is there a default admin password?

  • THS3024 Adjustment test point

    Thu, 29 Sep 2022 23:06:13 GMT – THS3024 Adjustment test point

    I'm following the adjustment procedure for the THS3024. The scope follows the procedure up until it gets to the end of CL0481, Input LF-HF Gain section. The next step on the scope is CL0460. There is no mention of this step or what signal it is looking for in the procedure. This happens at the the end of each channel, for two tests. CL0460, Bndwdth1 A and CL0461 Bndwdth2 A. Can you tell me what these points are looking for, an actual signal or no signal at all? If it is looking for a signal can you give me those test points?

  • DTM900 Adjustment Procedure

    Thu, 29 Sep 2022 23:06:11 GMT – DTM900 Adjustment Procedure

    Hello, I have DTM900 Digital Thermometer that is out of tolerance at 190 degrees Celsius K Type. Do you happen to have an adjustment procedure to adjust the temperature back into tolerance?
    Thank you,

  • CDM250 Adjustment procedure

    Thu, 29 Sep 2022 23:06:09 GMT – CDM250 Adjustment procedure

    I believe that my amps function is not reading properly, i wanted to see there is adjustment procedure for the digital multi meter.

  • AFG3152C Adding in External Signal

    Thu, 29 Sep 2022 23:06:08 GMT – AFG3152C Adding in External Signal

    I do not seem to be able to add in an external signal from the back panel "Add Signal" input. The output menu panel on the instrument does not offer an option to "Add External". Is this a limitation of the particular device I have, or could there be a setup issue related to not being able to enable this feature? I am trying to use this "Add External" feature to create a double pulse test pattern.

  • 2302 Adapter For GPIB to USB Connection

    Thu, 29 Sep 2022 23:06:06 GMT – 2302 Adapter For GPIB to USB Connection

    I'd like to get the KUSB-488D Adapter so it can connect to my
    2302 Battery Simulator. Does this work with Windows 10?

  • GPIB To USB Adapter for 2420?

    Thu, 29 Sep 2022 23:06:05 GMT – GPIB To USB Adapter for 2420?

    Is there an an Adapter that works with the Keithley 2420 and connects with USB to GPIB?