• TBS1072C Black Screen

    My TBS1072C would only boot up until the black Tektronix screen and wouldn't go any further. I have tried restarting the unit several times, but the problem persists. Do you have any suggestions on how to resolve this?

  • RSA306B Bit Stream

    If I use the decode signal & the OUTPUT, what would be the Bit Stream in real time?

  • TBS1000C BIOS up to date?

    Can you tell me how I can confirm that my TBS1000C BIOS system is up to date and also how I can determine the age of the unit?

  • MSO5204 BIOS defaults (RTC battery failure?)

    My MSO5204 scope stops booting at the BIOS screen and waits for the user to press F1. I suspect the battery that backs up the BIOS is dead.
    Can you tell me the battery type and how to access it?

  • DPO4104 Battery Removal and sanitiziation procedure

    Does the Tektronix DPO4104 have a removable battery? If so, is removal of the battery necessary to clear or sanitize the DPO4104?

    In looking through the sanitization procedure (see attached), does "remove power" mean merely power down the the DPO4104, unplug it from the wall outlet, or remove a battery?

  • Battery Pack for THS3014 - Power Cord Assembly

    Hello,

    I have misplaced my battery pack and was wondering if you can help provide me the part info?

  • DPO5104 Battery Type

    Can you provide details on the type of battery used inside the DPO5104?

  • Bandwidth limitation on MSO68B

    Is it true that the bandwidth of channels 3,4, 7 and 8 is limited to 5 GHz, even if it is only one channel turned on at a time? And that having one of these four channels on will limit all scope channels to be limited to 5 GHz? IOW, if we need the max bandwidth, we are restriced to using only channels 1,2, 5 and 6

  • Is the AFG31022 backwards compatible to the AFG3022C?

    I have a AFG3022C which I know is discontinued and want to know if the AFG31022 would work with the software and bench setup that I currently use.

  • AWG5200 Upgrades

    Hello,
    We currently have a AWG5208/825/8HV

    Can you please confirm the DAC sample rate is 5GS/s and whether or not there is an option of getting a higher sample rate with this unit.

    Also, is there an up-conversion option with this unit that allows the DACs to output at baseband and then upconvert to a carrier of my choice?

    I know there is an option to upgrade the sample rate from 2.5 GS/s to 5 GS/s (10 GS/s interpolated), AWG5200-2-2550. Is this something that could be added to the above unit via license or is hardware also required?

    Also regarding the up-conversion option AWG5200-2DIGUP, does it allow the unit to perform as the customer describes and is it upgradeable via license or is hardware also required?