Tektronix Applications Expert

The new TPP0500B has a newer probe cable that improves the durability of the probe and the probe tips are different. The electrical and mechanical specifications are the same.

The accessories are also the same for the two probes.

013-0362-01 will work with both the TPP0500 and TPP0500B.

013-0707-08 is not compatible with the either. Those are more commonly used with older generation probes such as the P6139A.

If you are interested in placing order or parts pricing, please reach out to our sales at 1.800.833.9200 option 1 or email the request to buy@tektronix.com.

Hello,

Specifications for the AFG31000 instrument series are listed in the Performance Verification Manual: https://www.tek.com/en/signal-generator/afg31000-function-generator-manual/afg31000-series-arbitrary-function-generator-1.

Thanks for contacting us,

Although the UI could use a better designation for it, it looks like what is being indicated is the end of the maintenance license rather than the software bundle license. You will still be able to use the scope and all of its current features indefinitely but in order to get new features and updates you may need to purchase a maintenance license after the expiration date listed. You can also see more clarification of the license structure here: https://www.tek.com/en/tektronix-maintenance-for-software

Hello,

If you are using the TTL Event to TekLink LVDS connector you will find pinout information on page 3 (PDF 19) of the user manual found below. You can also find this information in the AWGs internal user manual, simply press Help > User Manual.

https://www.tek.com/en/signal-generator-manual/awg5000/awg5012b-option-09-awg50bup-option-s39-user-manual

There is no default password. When shipped new with 3-SEC, there is no password setup.
If a user sets a password, it is NOT cleared when running TekSecure Erase.
If the password is lost or forgotten, the only way to reset it is to return the scope to Tektronix for service.

Hello,

Tektronix does not have an admin password for the scopes. The TDS5000B has the standard Windows operating system. To reset the forgotten password, you will need to work with your IT team. If they are unable to reset the password, you can run an OS restore. However, an OS restore will delete all of your saved data and will revert your firmware version. To run an OS restore, you will either need the original disks or you will have to send me your serial number and I can check if we have the disks.

Hello,

The accessories for this probe are listed in the Ordering Information of the datasheet: https://www.tek.com/en/datasheet/passive-10x-voltage-probe. Based on your request, I'm assuming that you are looking for the 6 in alligator ground lead and the retractable hook tip. The current part numbers for these accessories are 196-3521-01 and 013-0362-01.

To order these parts, you can call our sales team at 1-800-833-9200 option 1 or email buy@tektronix.com.

Hello,

The P2220 only includes one cable. The user manual lists the items included with the P2220.

Hello,
This information is in the Declassification manual on tek.com link below.
https://www.tek.com/en/oscilloscope/dpo70000-mso70000-manual/dpo7000-c-dpo70000-b-c-d-dx-dsa70000-b-c-d-mso70000-c-dx-mso-0

A good replacement to the the obsoleted Keithley 197A will be the DMM6500.

Link below to the data sheet:
https://www.tek.com/en/products/keithley/digital-multimeter/dmm6500

You can also have a look at the Keithley model 5806 Kelvin test leads for low level measurement:

Link below:

https://www.tek.com/en/search?keywords=5806&facets=_templatename%3dDatasheet&sort=