• Can't activate sequence mode on AFG31052

    Hi,
    I just purchased an AFG31052 and I am trying to program a sequence of waveforms. It seems like when I go to select the mode however it will only let me choose continuous output, when I press any of the other options it just doesn't change. Do you know why this might be?

  • MDO3104 will not turn on

    MDO3104 cannot turn on. All LED light up but no further steps. Can you help?

  • Cannot select "Sequence" Run Mode on AFG31152

    From Advanced screen --> Swipe up from bottom of screen to reveal Run Mode menu --> I cannot change from "Continuous" to any other mode.

    I want to change to "Sequence" mode but I'm unable to (touching the screen to change mode is ignored).

    Any help appreciated.

  • Cannot mount shared directory on MDO34

    I've shared a directory on a Linux machine on the local network but the scope fails to mount it. It mounts with no problems from other machines on the network. I've upgraded the MDO34 firmware to the latest (1.12.15) and looked through similar complaints online, but not found anything useful.

  • MSO58 cannot get correct IP address for LXI

    My scope used to work correctly for LXI however, it has stopped resolving correct IP address for LXI to work. I just cannot connect to the LXI interface either from internal or external network. Reboot doesn't help, same lan cable is OK with other devices. Please help.

  • Help with option 5-PWR for switching loss analysis on MSO54B

    We recently purchased a new MSO54B 5 series oscilloscope. I can see the option 5-PWR for power swithching loss (MOSFET) analysis installed in the scope, however I do not see the green small checkmark. I am trying to find the .lic key online for 5-PWR for the 5 series MSO54B. I was able to download and install the free DMM .lic file after registering , the DMM works. I need to do some switching loss MOSFET measurement and I cannot find 5-PWR option anywhere. I see SUP5-PWR and was not able to get a 30 day eval .lic file for SUP5-PWR. Also, I get error message on the Tektronix website and I am not sure option 5-PWR is even listed on the website.
    Is there a user manual pdf or app note on 5-PWR. Interested mainly in switching loss measurement, I have a current probe and also ISOVU optical probe on the gate and also on Drain Source. I just am looking for a temporary 30 day license file to try the 5-PWR power analysis option. I already emailed buy@tek.com for prices (for 1 year and also perpetual).
    Please help how to download a .lic file for MSO54B option 5-PWR . Tek account email is gnazerian@vepcotech.com , company name is VEPCO Technologies

  • MSO46 cannot communicate with O-Scope using USB

    I am trying to control a Tektronix MSO46 using the USB socket with my computer. Am using NIMax as the software interface and it does not recognize the MSO46 when it is plugged into the USB port. The computer is running Win 10 and we are using the on board USB socket to interface to the MSO46. Is there a driver I need to download to make NI Max communicate with the MSO46?

  • MSO5204 cannot communicate via USBTMC

    I'm trying to communicate with Tek MSO5204 scope via USB connection on rear. I am not seeing Scope on NI max like usual. Scope keeps saying unable to communicate the VXI-11 Server.

  • DPO75002SX won't trigger on pulses above 28 GHz

    Hello! We have 4 DPO7500 scopes that can measure up to 50GHz. We are having a problem where the scope will not trigger correctly past 28GHz. We are sending a simple signal: 1 us pulse width and period of 2 us. When we bring down the frequency inside the pulse the scope does fine, but past 28GHz it begins to fail. Why is this happening?

  • Synchronizing the AFG31102 with older Tek models

    We currently have older version of AFGs (AFG3102 and AFG3102C), and we've been synchronizing multiple AFGs to achieve synchronized output signals.
    Can the newer AFG31102 and AFG31052 be synchronized with the older AFGs?